Last Update:

We've found 20641 reviews. We have considered users feedback on Table Saw and our suggestions includes in this article.

Top Best Mobile Miter Saw Stand

We have collected information for Best table saw and selected only ten of them based on 20641 reviews. As we believe our shortlist will be helpful whose are also looking for best 3hp table saw. However, You can check our scores on Best table saw and read full specifications each of the products. Check our listing for "table saw" -

NoProductScoreAction
1Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK73239.8Check Price
2SKIL 3410-02 10-Inch Table Saw with Folding Stand9.8Check Price
3DEWALT DW745S Compact Job Site Table Saw with Folding Stand9.6Check Price
4Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle9.6Check Price
5SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw9.4Check Price
6Bosch Power Tools 4100-10 Tablesaw - 10 Inch Jobsite Table Saw with 25 Inch Cutting Capacity and Portable Folding Table Stand9.4Check Price
7DEWALT DW745 10-Inch Table Saw, 20-Inch Rip Capacity9.2Check Price
8DEWALT (DWE7491RS) 10-Inch Table Saw, 32-1/2-Inch Rip Capacity8.8Check Price
9Metabo HPT Compound Miter Saw, 10-Inch, Single Bevel, 15-Amp Motor, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10" 24T TCT Miter Saw Blade (C10FCGS)8.8Check Price
10DEWALT DWE7485 8-1/4 in. Compact Jobsite Table Saw8.4Check Price

Table Of Content:

1. Rockwell BladeRunner X2 Portable Tabletop Saw with Steel Rip Fence, Miter Gauge, and 7 Accessories – RK7323

  • Portable table saw sets up in seconds to cut wood, metal, tile, aluminum and plastic – display rip, scroll, miter, and cut
  • Compact and portable with built-in Table at the top of the handle to carry anywhere – weighs in at less than 15 pounds. No-load speed – 3000/min. The Bladerunner X2 cut a variety of materials depending on the type of Blade you are using. Pick the blade that best suits the job, from the scroll, to cutting rip cuts, The Bladerunner cutting capacity will vary depending on the material wood – 1-1/2 inch. PVC pipe – 1-1/4 inch. Aluminum – 3/8 inches. Steel – 1/8 inch. Ceramic – 3/8 inch
  • Hold-down Guard and splitter cut wider material and a larger rip fence for better control and a good, accurate cut . Table size – 15-3/4 x 17 inches
  • Quick, tool-free blade change; change blades in 3 seconds – compatible with any 4″ t-jigsaw blades shank
  • Also included is a vacuum port, a steel rip fence, miter gauge, 5-piece starter blade set and the manufacturer’s 3 years warranty . Stroke length:3/4 inch.Input power:5.5 Amps

2. SKIL 3410-02 10-Inch Table Saw with Folding Stand

  • 20-inch x 26 inch cast aluminum table expand to 20-inch x 32-inch for longer pieces of work
  • 3-1/2-inch height capacity for cutting through 4x materials
  • Heavy-duty steel stand for fast setup and easy transport . Bevel angle range:0° to 47°
  • Self-aligning rip fence for accurate measurements
  • Ez view measurement system for accurate settings.Cord length:6 feet

3. DEWALT DW745S Compact Job Site Table Saw with Folding Stand

  • 45lbs unit weight and optimized footprint make this the most portable saw in its class; shoe bevels 0° to 45° to cut beveled
  • 15 amp motor quickly rips through hardwoods with ease
  • Powerful 1850 watt motor for high performance in all applications (1300 Watt 110 version for UK only)
  • The fence system provides up to 20 inches of rip capacity in a portable design for cutting large sheet materials to size
  • Lightweight; folds flat for easy handling, storage and transportation; no-load speed: 3,850 rpm

4. Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle

  • Portable: ultimate portability and maneuverability thanks to the balanced hand with a carry handle and compact design allows you to bring this to the table saw with no matter the jobsite
  • Tough: durable and unique all-steel base allows this portable table saw to take on the most difficult job site abuse; all steel base is designed to withstand heavy impact and provide long lasting performance
  • Precision: square lock rip fence self-aligning design for accurate performance and the cutting stability as you glide along the Saw rail with ease; too smart guard with anti-kickback pawls and riving knife system give you full control
  • Versatile: 10 inch 24 teeth carbide table saw blade provides customized 18 inches; rip capacity and a 5,000 no load RPM of the motor for a wide range of job site applications
  • Convenient: to keep your workplace with clear, full-on tool storage under Table-store, rip fence, smart guard, miter gauge, and wrenches. Included free accessories dust chute clear out on the back of table saw

5. SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw

  • The first ever brass worm gear drive table saw for Max Power and torque.
  • 15 Amp solid construction with dual-motor area to increase the speed of cutting and extended motor life
  • 25. Rip capacity and 3-1/2 in. Depth of cut for a wide variety of materials
  • Self-aligning rip fence on-tool storage for a true cut
  • Portable and compact while staying lightweight at only 49 lbs.Table material:aluminum

6. Bosch Power Tools 4100-10 Tablesaw – 10 Inch Jobsite Table Saw with 25 Inch Cutting Capacity and Portable Folding Table Stand

  • Powerful: 10-inch job site band saw: 15 amp circular saw that delivers 4.0 maximum horsepower and 3,650 RPM for the power required for ripping, rip cutting, and cross cutting fine and rough carpentry materials
  • Saves space: large cast aluminum top provides increased work space and material support with a 25-inch . Stunning capacity to cover all the typical job site rip cutting width
  • Portability: works seamlessly with the included lighter GTA47W gravity rise wheeled stand for easy site mobility, with single-action setup and take down
  • Protection: smart guard system includes a riving knife and anti-kickback pawls provide protection, while the guard assembly provides a barrier to help prevent contact with the blade, while allowing an unobstructed view of the cut
  • Soft-start circuit: the management of intensity to start the motor and reduces the likelihood of tripping a circuit breaker

7. DEWALT DW745 10-Inch Table Saw, 20-Inch Rip Capacity

  • 22 kg unit weight and optimized footprint make this the most portable saw in its class. Shoe bevels 0 to 45 for cut beveled
  • Steel roll cage protects saw against jobsite drops and impacts rack and pinion fence system, front and rear fence lock and large, clear scales combine to give a highly accurate and easy-to-use saw
  • Powerful 1850 watt motor for high performance in all applications (1300 Watt 110 version for UK only). Maximum RIP to left of Blade 12 inches. Maximum RIP to right of Blade 20-inch
  • The fence system provides 610 millimeter of rip capacity in a portable design for cutting large sheet materials to size
  • Cast table top design ensures accuracy and precision overload protection system ensures powerful performance in hard, wet or frozen woods quick bevel lock with large scale for easy, accurate adjustment
  • Standard: 24 tooth series 30 saw blade, Mitre fence, 2 Blade spanners, parallel fence, dust port reducer, push stick. No load speed: 3,850 rpm
  • 15 Amp motor quickly rips through hardwoods with ease
  • Rack and pinion fence rails make the fence adjustments fast, smooth and accurate
  • Telescoping fence rails retract to create a small, portable package
  • 20-inch of rip easily cuts a variety of larger shelving and trim materials. Metal roll cage base offers greater durability than plastic bases blade can be adjusted 0 to 45 degrees for bevel applications
  • The dw745 does not include a stand: the weight is only 45 pounds, the dw745 can easily be moved on and off work
  • Please note: This item is built-in and design for North America

8. DEWALT (DWE7491RS) 10-Inch Table Saw, 32-1/2-Inch Rip Capacity

  • Features a 15.0 a high-torque motor with the power to cut pressure-treated lumber and hardwoods
  • This product is manufactured in Mexico; tool weight: 90 pounds
  • This product customer’s requirement
  • No load speed:4800 rpm

9. Metabo HPT Compound Miter Saw, 10-Inch, Single Bevel, 15-Amp Motor, 0-52° Miter Angle Range, 0-45° Bevel Range, Large Table, 10″ 24T TCT Miter Saw Blade (C10FCGS)

  • 10″ compound Miter saw
  • The same accessories. The new name is. Hitachi Power Tools was renamed to Metabo HPT
  • Miter angle range: 0°-52° to the right and left for increased flexibility
  • Bevel range: 0°to -45, to the left with adjustable Bevel stops for precision cuts
  • 15 Amp motor to deliver high power in the most difficult of cuts
  • Large table for better material support with its clamping system to secure the work piece
  • Thumb positive stops for quick miter adjustments
  • Carbon brush access allows user to replace brush as needed to greatly prolong the life of the tool

10. DEWALT DWE7485 8-1/4 in. Compact Jobsite Table Saw

  • Compact size for ease of transportation and storage
  • Rack and pinion telescoping fence rails make the fence adjustments fast, smooth and accurate
  • 24. 5 in. Rip capacity for ripping 4×8 plywood or OSB sheets
  • Power loss reset casual prevents re-start after power disruption when tool is left in the On position
  • Blade brake